Home / GP-9F Package (5175254) 9,000-lb. Capacity

GP-9F Package (5175254) 9,000-lb. Capacity

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Description

    • BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
    • Designed to be fastened to the floor or free-standing.
    • Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, and hardened steel tire stops.
    • Boxed-steel columns are made from structural 4.75” x 4.75″ welded steel tubing.
    • Columns feature 12” x 12” baseplates 5/8” thick.
    • Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
    • 3/4″ thick steel safety locks are spring loaded for automatic and solid engagement.
    • 13 positive locking positions are spaced every 4 inches.
    • Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
    • Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
    • ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can’t become dislodged or disengaged.
    • Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
    • Runways are welded and boxed for extra strength.
    • Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
    • Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
    • Low-profile runways are only 5″ high to accommodate low ride-height vehicles.
    • Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
    • Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
    • 5/8″ thick top caps.
    • Sheave axles feature hardened steel collars and snap rings.
    • Pull out tire stops on both ends of the lift that allows drive through capability.
    • Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
    • Cable keepers assures cables remain safely secure to the sheaves.
    • Pre-assembled cables simplifies installation.
    • 36″ aluminum approach ramps are gusseted to eliminate flex and bending.
    • Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
    • Durable powder coat finish.
    • 3/4″ runway bolts provide positive attachment with increased safety factor.
    • Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
    • Electric/hydraulic power system.
    • Single hydraulic cylinder underneath runway.
    • Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.

    Capacity

    Lifting Capacity*
    9 000 lbs. (4 082 kg)
    *Max Capacity / Front Axle
    4 500 lbs. (2 041 kg)
    *Max Capacity / Rear Axle
    4 500 lbs. (2 041 kg)

    Rise

    A – Min. Runway Height:
    5″ (127 mm)
    B – Max. Rise:
    70″ (1 778 mm)
    C – Max. Lifting Height:
    75″ (1 905 mm)
    Time to Full Rise:
    45 seconds

    Outside Dimensions

    D – Overall Width:
    114,5″ (2 908 mm)
    E – Outside Length:
    176,5″ (4 483 mm)
    F – Overall Length:
    203″ (5 156 mm)
    G – Height of Columns:
    89″ (2 261 mm)

    Inside Dimensions

    H – Width Between Columns:
    98″ (2 489 mm)
    I – Drive-Thru Clearance:
    86″ (2 184 mm)

    Runways

    J – Runway Width:
    18,75″ (476 mm)
    K – Length of Runways:
    165,5″ (4 204 mm)
    L – Width Between Runways:
    37,5″ (953 mm)
    M – Runway Centerline:
    53,75″ (1 365 mm)
    N – Outside Edge of Runways:
    72,5″ (1 842 mm)

    Minimum Wheelbase

    Rated Capacity:
    115″ (2 921 mm)
    75% Capacity:
    100″ (2 540 mm)
    50% Capacity:
    85″ (2 159 mm)
    25% Capacity:
    70″ (1 778 mm)

    Locking

    Locking Positions:
    13
    Lock Spacing:
    Every 4” (102 mm)

    Power Unit

    Motor:
    STANDARD: 110VAC, 50-60HZ, 1PH, 20A or OPTIONAL: 208-230VAC, 50-60HZ, 1PH, 25A
    Noise:
    45 dB

    Shipping

    Weight:
    2,224 lbs. (1008.8 kg)
    Dimensions:
    166” x 22” x 43” (4,203 mm x 4,203 mm x 1,092 mm)
BACK